Bosch TES503 Series Instruction Manual page 43

If the water ilter is activated, the
ilter and then press the
again. Remove the ilter now if you have
Fill descaler
Press start
●
●
Calc'n'Clean in progress
The descaling pro gramme will now run for
about 1 0 minutes.
Place container
Pull milk frother
●
●
Calc'n'Clean in progress
The descaling pro gramme will now run for
about 1 2 minutes.
Clean / Fill water tank
Press start
● Rinse the water tank (16) and reill it with
●
Calc'n'Clean in progress
The descaling pro gramme now runs for
about 3 0 seconds and rinses the appliance.
Push milk frother
●
Calc'n'Clean in progress
The cleaning pro gramme will now run for
about 8 minutes.
Empty drip tray
Insert drip tray
●
Replace the ilter if one is being used. The
appliance has inished cleaning is ready for
contain salts. Salts can cause rust ilm
¡ T o a v o i d d a m a g e f r o m l o w t e m p e r a -
t u r e s d u r i n g t r a n s p o r t a n d s t o r a g e ,
t h e a p p l i a n c e m u s t b e c o m p l e t e l y
emptied irst.
and the water tank (16) illed.
h b u tton ( 1 1 ) .
button (11) lashes and the
T h e h
Pull milk frother.
3 . Open the milk frother ( 6 ) by pulling
it out and release steam for about
1 5 seconds.
4 . Switch the appliance off at the power
on/off switch O / I ( 9 ) .
5 . Empty the water tank ( 1 6 ) and the
drip tray ( 8 ) .