Recording Mode - Gnet G-On User Manual

HOW TO USE

Recording Mode

Normal Recording
Impact
Recording
Event Parking
Recording Recording
Motion
Detection
recording
- When the power is connected, the normal recording will start.
- Security LED flickers left and right every 2 seconds.
- If there is impact or shock, the record LED will flicker and
record in event recording mode
- After event recording is finished, it will be automatically
changed to normal recording mode
- After the parking mode is entered when the ACC voltage
is released, the parking mode automatically operates in
10seconds (3 Wired)
- It is recorded in 10 frames, so the recording time can be extended.
- Security LED flickers left and right every 4 seconds
- If it connects with ACC voltage, it switchs to normal recording
mode (3 Wired)
- Under parking mode, the device will record any movement
happen around 3M.
- Security LED will quickly flicker
- After motion detection recording is finished, the motion
recording will be automatically changed to parking mode
18
FUNCTION 02