Vax PowerPlus VPW2C Manual page 16

Taking care of your machine
IMPORTANT: Before storing your pressure washer/compressor always make sure no water remains in the pressure
washer/steamer, hose, lance, nozzle and water tank. Once the pressure washer/compressor is switched off and
before removing the lance, nozzle or trigger handle always squeeze the trigger until no further water is released, to
prevent frost damage. Keep in a dry place above zero degrees and out of the reach of children.
Storing your pressure washer/steamer
To remove the nozzle from the lance,
press the nozzle release button on the
lance and pull nozzle.
Always store tools, power cord and
pressure hose into allocated
storage slots.
Before removing pressure hose, lance and nozzle always squeeze trigger until water stops
TIP
releasing pressure build up.
To remove the lance from the trigger
handle, firmly push and twist the
lance anti-clockwise. When unlocked
pull to remove.
To release pressure hose, press the
pressure hose release button and
pull pressure hose to remove.