Table of Contents
Advertisement
Using your machine
IMPORTANT: Always use an RCD (Residual Current Device) adaptor when using the pressure washer/compressor.
CAUTION: After connecting pressure hose, lance and accessories check they are securely fitted and locked into
place before switching the pressure washer on.
CAUTION: Never aim the high pressured water jet at people, animals, plants, electrical components,
wires or the pressure washer itself.
Make sure the water supply is not on.
Firmly push the water hose pipe with
suitable connector onto the water
inlet, lock into place.
Before plugging the pressure washer
into the mains supply, press the safety
button on the trigger handle to 'unlock'
and squeeze the trigger until water
starts to flow through the nozzle.
Connect the water hose pipe to a
suitable water supply and turn the
water on.
'Lock' the safety button on the trigger
handle. Firmly push the lance into
trigger handle, turning clockwise
until locked into place.
Advertisement
Table of Contents
