Canature 95 Series Installation And Operation Manual page 22

22
Replace or Cleaning Injectors
Sediment, salt and silt will restrict or clog the injector. A clean water supply and pure salt
will prevent this from happening.
The injector assembly is located on the right side of the control valve. This assembly is
easy to clean.
To replace the Injectors:
Shut off the water supply to your softener and reduce the pressure by opening a cold

soft water faucet.
Remove the Connector

Remove the Screw

Slightly pull the Injector Body and Injector Cover outward

Slightly pull out the Screen

Replace the Nozzle

Slightly pull out the Air Disperser

Replace the Throat

Reassemble using the reverse procedure

Note: Carefully flush all parts including the screen. Use a mild acid such as vinegar or Pro-
Rust Out to clean the small holes in the orifice and throat.