Canature 95 Series Installation And Operation Manual page 15

15
Automatic Calculate mode contains advanced system settings.
In Regen Mode you can select four different regeneration modes. The system should be set
to Meter Delayed for proper operation.
Calendar Clock: the unit will initiate regeneration at the next pre-set regeneration time
based on the interval of days between regeneration days.
Meter Immediate: the unit will initiate regeneration immediately after the volume remain-
ing reaches zero.
Meter Delayed: this is the most common setting. When the volume remaining reaches
zero, the system will initiate regeneration at the next preset regeneration time.
Meter Override: when the volume remaining reaches zero, the system will initiate regen-
eration at the next pre-set regeneration time. If the days between regeneration are reached
before the volume remaining reaches zero, the system will override the meter setting and
initiate regeneration.