Table of Contents
Advertisement
UNPACKING & ASSEMBLY
Before commencing please check contents and advise immediately of any
shortages.
FIGURES IN BRACKETS REFER TO DIAGRAM & PARTS LIST ON PAGES 13 & 14
1 x Motor, Fan & Collector Body Assembly c/w switch assembly
1 x Base Plate (4)
1 x Connecting Duct (19)
2 x Side Collector Bodies (24 & 21)
2 x Upright Collector Supports (23)
2 x Upper Bag Supports (26)
4 x Bag Clamping straps (36)
2 x Collector Bags (22)
2 x Filter Bags (27)
1 x 3-Branch Inlet / Adaptor (29)
3 x Packing Gaskets (seals) (28)
4 x Castors (1)
1 x Fixings Pack Fixings pack comprising 16 x Philips screws & nuts, 34 x
short 13mm hex head, 4 x long 13mm hex head, 38 washers, 2 wrenches.
1 x Operating Instruction Manual (this document)
TOOLS REQUIRED
Philips Screwdriver
10 mm spanner
13mm spanner
ASSEMBLY
1. Attach the four castors to each
corner of baseplate with the
small bolts and cross headed
screws provided and tighten with
the 8mm spanner and phillips
screwdriver. Fig 1.
IMPORTANT
8
Advertisement
Table of Contents
