Preparation For Use; Unpacking And Assembly - Clarke VAC KING CCVAC20SS Operating & Maintenance Instructions

Wet & dry vacuum cleaners
Table of Contents

Advertisement

PREPARATION FOR USE

WARNING: Before using the CVAC, make sure that you have read and
understood the safety instructions
UNPACKING & ASSEMBLY
With the CVAC removed from the packaging, undo the two clamps securing
the head and remove the components from within the tank. Lay them out
and check for shortages and that no damage was suffered in transit.
For ease of mobility, the CVAC base is provided with castors which require
assembling. Push the four castors onto their mountings firmly.
THE FILTERS
Filters are essential to ensure that dust or foreign matter does not enter the
motor compartment which would reduce motor efficiency, and eventually
cause serious damage.
During dry operation, the double filtering action of the linen and paper bag
filters protects the motor from dust and dirt but also ensures that the cleanest
possible air is exhausted, thereby preventing dust being spread into the
environment.
a. Foam Filter
b. Cartridge Filter
c. Paper Bag Filter
a.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
b.
8
c.

Advertisement

Table of Contents
loading

Table of Contents