Unpacking & Assembly - Clarke Woodworker CDE1000 Operating & Maintenance Instructions

UNPACKING
When unpacking please check contents and advise your dealer immediately
if any parts are missing. The essential parts of the machine are as follows;
1. Motor casing
2. Shavings container
3. On/off switch
4. Locking strap
Release the locking strap and
remove the motor casing.
The following are supplied loose
and require assembly;
5. Inlet hose (100 mm dia)
6. Hose clamps (x2)
7 Filter cartridge
8 Filter bags
9 Inlet adaptor set (28, 35, 40,
63 & 99mm diameter sizes)
Instruction manual (this
document)
7