Page 1
User manual WIP // 27.02.20 Single option In the box Assembling your machine Getting started Caring for your floors The LCD screen Charging your machine Changing your click-in battery Emptying your bin Cleaning your bin Washing your filter Washing your High Torque XL cleaner head Washing your Soft roller cleaner head Washing your tools Using your High Torque XL cleaner head...
Page 2
(Dynamic Load Sensor) system. Covers more floor with each sweep, for faster room cleaning. Wand Some tools may not be included. You can buy additional tools at Dyson.com Mini motorized tool Combination tool Crevice tool Soft roller cleaner head The motorized brush bar Two tools in one –...
100% Auto Auto Boost Boost The optimum balance of power and run time. Attach your High Torque XL cleaner head to activate Auto mode. Dyson DLS™ technology automatically changes motor speed between floor types. 100% 100% Auto Boost Ελληνικ English...
The LCD screen Auto Boost Auto Auto Boost 100% 100% Settings menu Control the settings on your machine using the button. Auto Boost 100% To enter the settings menu, press and hold the button until the menu screen appears. Tap to scroll through the options available.
Page 5
Charging your machine Changing your click-in battery It’s important to fully charge your new machine Where you have additional batteries, before using it for the first time, and after we recommend that you alternate the every clean. This is because the battery and batteries to maintain even performance.
Page 6
Emptying your bin Empty as soon as the dirt reaches Be careful not to pull the power the MAX level – don’t overfill. trigger while the clear bin is open Using the machine when the dirt for emptying. is above the MAX line may cause the dirt to reach the filter and more frequent maintenance will be required.
Washing your filter To always get the best performance from your The LCD display will alert you when the filter unit machine, it is important to regularly clean the filters needs washing. We recommend that you wash your and check for blockages. filter at least once a month or when your machine alerts you.
Page 8
Washing your High Torque XL cleaner head To maintain optimum performance, check and wash your brush bar regularly. Make sure your machine is disconnected from the charger and take care not to touch the trigger. Don’t put your brush bar in a dishwasher, Hold your brush bar under cold tap water and The cleaner head housing is not washable and washing machine, tumble dryer, oven,...
Page 9
Washing your Soft roller cleaner head click click...
Page 10
Washing your tools Using your High Torque XL cleaner head Combination tool Crevice tool Your High Torque XL cleaner head has a slider Don’t put any part of your machine in a dishwasher or use detergents, polishes or air fresheners. control to adjust the suction of the cleaner head.
Looking for blockages Your machine is fitted with an automatic cut-out. Be careful not to pull the power trigger If any part becomes blocked, the machine may while looking for blockages. automatically cut out. Make sure any blockages are clear and all parts The motor will pulse and the LCD screen are refitted before using your machine.
Page 12
Soft roller cleaner head maintenance – clearing blockages...