Oceanic VEO 100 Nx Manual page 112

WET CONTACTS
WET CONTACTS
•
The contacts are located in the button stem and back of the
case.
•
Once the unit is dry, the graphic H2O will disappear from
the display.
•
If the unit is not cleaned and dried prior to the countdowns
reaching 0:00 (hr:min), or making another dive, it will shut
off then automatically reactivate.
•
The graphic H2O would then appear in place of Dive
Number when Surface Mode is displayed during the
Surface Sequence.
•
If no dive is made after activation, the unit would shut off
after 2 hours, then automatically reactivate again if wet,
repeating the action until cleaned and dried.