LaserLiner SmartVision-Laser Manual page 10

– Attention: Do not look into the direct or reflected beam.
– Do not point the laser beam towards persons.
– If a person's eyes are exposed to class 2 laser radiation, they should
shut their eyes and immediately move away from the beam.
– Under no circumstances should optical instruments
(magnifying glass, microscope, binoculars) be used to look
at the laser beam or reflections.
– Do not use the laser at eye level (1.40 ... 1.90 m)
– Reflective, specular or shiny surfaces must be covered whilst
laser devices are in operation.
– In public areas shield off the laser beam with barriers and
partitions wherever possible and identify the laser area with
warning signs.
Safety instructions
Dealing with electromagnetic radiation
– The measuring device complies with electromagnetic
compatibility regulations and limits in accordance with
the EMC Directive 2014/30/EU.
– Local operating restrictions – for example, in hospitals,
aircraft, petrol stations or in the vicinity of people with
pacemakers – may apply. There is a possibility of a dangerous
impact on – or interference with – electronic devices.
Special product features
is brought into initial position and aligns itself autonomously.
The laser lines pulsate at a high frequency and this can be
picked up by special laser receiversover long distances.
10
EN
Automatic alignment of the device with a mag-
netically dampened pendulum system. The device
Transport LOCK: The device is protected with
a pendelum lock during transport.
GRX-READY technology enables line lasers to
be used even in unfavourable light conditions.