Led Indicators - Datalogic JoYa A6 Touch User Manual

LED Indicators

The LEDs illuminate to indicate various functions or errors on the
reader. Joya Touch A6 LEDs are fully customizable through the SDK,
the Settings app or the Led Effects Editor app. See
on page 62 and
The following table lists the default indicators.
LED
Left and Right LEDs
Bottom LED (Good Red)
User's Manual
Led Effects Editor on page 129
Default Status
The two LEDs blink alternately in case of critical
charge (the device is charging, but the battery
level is too low to turn on).
The two LEDs blink once simultaneously after a
full shutdown.
Illuminates when a good decode is completed.
Getting Started
Led Notifications
for more details.
51