Status Indicators; Led Status - Datalogic Skorpio X3 User Manual

4
4.5

STATUS INDICATORS

4.5.1

LED Status

The Skorpio X3 provides three different LEDs signaling the mobile computer status.
LED
∗
Good Read
(right side)
Charging Status
(left side)
Keyboard Status
(center)
∗
The Good Read LED has also a "Suspend LED" feature. The decode LED will glow red when
the device begins to suspend, and will turn off when the suspend completes successfully
50
STATUS
Red
Green
Green
Red
Blinking Red
Blinking Amber
Off
Solid Yellow
Solid Blue
Pink
Scanning LED is ON from the time the
user hits the scan button (or trigger) until
the bar code is decoded (laser models)
Time-out (imager models).
Scanning LED is ON, showing a good
decode.
It is solid once the charging process has
been completed (full charge).
It is solid while charging.
It blinks in case of charge fault.
It blinks when the device raises a
notification to the user.
Keyboard in primary.
Yellow alternate key mode.
Blue alternate key mode
CapsLock enabled.
1 SKORPIO™ X3