Linhai M565Li Owner's Manual page 43

7. CONTROL AND PARTS FUNCTIONS
4Wheel Drive / Diff Lock System
This ATV is equipped with
electric selectable 2WD/4WD
drive. Select the appropriate
2WD / 4WD mode according
to the conditions.
2WD:
Only rear wheels are driven.
4WD:
All 4 wheels are driven.
To change the drive mode from 2WD to 4WD, stop the ATV and press red drive
select button to the 4WD position. The 4WD indicator light goes on on display.
To change drive mode from 4WD to 2WD, stop the ATV and press red drive select
button to the 2WD position.
To engage the front differential lock:
Open the cover and press the yellow button. When pressed, the button slides out.
CAUTION:
Always shift only when ATV doesn´t move.
NOTE:
When shift 2WD/ 4WD or Diff Lock, the mechanics in the front gear box maybe still
engaged/ disengaged, the mechanics would finally disengaged/ engaged when
rides on a hard surface or rides in reverse.
Do not switch to 4WD if the wheels are moving. This may cause severe damage.
When switching to 4WD, the button will stay in 4WD position but 4WD mechanics
may be still disengaged. Always apply throttle gently and let the wheels move
slightly to allow the 4WD mechanics finally engage. The 4WD indicator on the
speedometer will come on when 4WD is engaged.
M565Li OWNER'S/OPERATOR'S MANUAL
Press 1x: 4WD
Press 2x: 2WD
43
Press 1x: 4WD
Press 2x: 4WD + Diff Lock