Download Print this page

Santec Designer Series Instruction Booklet page 7

1/2" thermostatic trim with volume control / 2/3-way diverter

Advertisement

WARNING: Do not clean your SANTEC product with ammonia (window cleaner), bleach, soaps, acids, abrasives, harsh polishes,
harsh cleaners, a coarse surfaced cloth, coarse sponge, or any type of scouring pad. Doing so may ruin your faucet finish and/or
void the warranty.
Thank you for making SANTEC a part of your lifestyle and luxury spa experience. Our products have been created as works
of enduring quality and sophisticated design. Luxurious finishes need proper care and attention, so in order to understand
how to properly clean your distinctive luxury finish, please refer to the finish care information below:
Your SANTEC product can be identified in one of two categories: clear coated finishes or non-clear coated finishes. Clear coated finishes
are more scratch-sensitive and are more reactant to harsh cleaning chemicals than non-clear coated finishes. Once you have identified
the specific luxury finish of your SANTEC product, please follow the important corresponding care instructions.
Living
nishes are unique, are intended to change over time and are exluded from the
nish warranty. Any product outdoors or in a marine environment are excluded from the
nish warranty.
Clear Coated Finishes are as Follows:
We recommend that all faucets, drains, etc., be gently wiped dry with a soft cloth after use to avoid water spotting and
water deposit build-up. A mild liquid hand soap may be used occasionally if desired. Use of a non-abrasive carnauba wax
will add protection to the finish and should be used if the faucets will not be dried after use. Santec Orobrass kitchen
products are clear coated. For clear coated finishes, it is recommened to clean your product weekly with a soft moist cloth.
We recommend that all faucets, drains, etc., be gently wiped dry with a soft cloth after use to avoid water spotting and water
deposit build-up. A mild liquid hand soap may be used occasionally if desired. Use of a non-abrasive carnauba wax
isoccasially required and will add protection to the finish if the faucets will not be dried after use.
Please read 'WHAT IS COVERED BY OUR WARRANTY'and 'EXCLUSIONS AND LIMITATIONS OF WARRANTY'sections to
understand what is and what is not covered. Please have ready the proof of purchase (original sales receipt), description of
the problem, and carefully package the product or defective part with postage prepaid. Then, please contact your local
SANTECSh owroom or write to SANTEC Technical Services.
3501 Challenger Street
Torrance, CA 90503
www.santecfaucet.com
F I N I S H C A R E I N F O R M A T I O N
C L E A R C O A T E D F I N I S H E S
N O N - C L E A R C O A T E D F I N I S H E S
T O O B T A I N WA R R A N T Y S E R V I C E
Phone.
310.542.0063
Fax.
310.542.5681
Effective: 05/01/2015

Advertisement

loading

This manual is also suitable for:

Ph9707Ph9710Ph9708Ph9711