Advertisement
1
2 [QSA2700 only]
3 [QSA2700D only]
4
5 [QSA2700D only]
6
7
8
9
10
LED colors and patterns (QSA2700)
Color
Green
Yellow
Red
Red
Red/yellow
Modbus configuration
The device is configurable by a Modbus master device. Configure the device before
mounting. See Modbus registers (Software version 1.2.12) [➙ 9] and Modbus registers
(Software version 1.3.13) [➙ 10] for more information.
Push button operations for Modbus resetting and configuration
QSA2700:
On-event addressing is a rapid configuration approach working together with Siemens
Climatix
The sensor is wired and connected to the Climatix
Siemens
Smart Infrastructure
Hole for wiring (top) for surface mounting
LED
LCD display
(power supply for display only)
Proximity sensor
Push button
Hole for wiring (bottom) for surface mounting
Hole for attaching the mounting plate to the housing
Air outlet
Air inlet
Pattern
Permanently on
Permanently on
Permanently on
Flashing (0.5 s on/0. 5 s off)
Flashing (0.5 s red/0. 5 s yellow)
TM
controllers.
Description
Working properly, Modbus configured
Working properly, Modbus with factory settings
Error 1, replace sensor module
Error 2, communication error
Possible inaccurate measurement
TM
controller via Modbus.
3
A6V11396712
2020-08-17
Advertisement
