Termozeta AIRZETA CLIMA Instruction Manual page 32

Big Noise
compressor does
not work.
The remote
control does not
work.
Displays 'E1'.
Displays 'E2'
Note: If problems not listed in the table occur or recommended solutions do not work, please
contact the professional service organization.
The air conditioning is not placed
on a flat surface.
Overheat protection starts.
The distance between
machine and the remote control
is too far.
The remote control is not aligned
with the direction of the remote
control receiver.
Batteries are dead.
The pipe temperature sensor is
abnormal.
The room temperature sensor is
abnormal.
Put the air conditioning on a flat
and hard place (to reduce noise).
Wait for 3 minutes until the
temperature is lowered, and then
restart the machine.
the
Let the remote control get close to
the air conditioning, and make
sure that the remote control
directly faces to the direction of
the remote control receiver.
Replace batteries.
Check
sensor and related circuitry.
Check the room temperature
sensor and related circuitry.
32
the pipe temperature