Troubleshooting - Termozeta AIRZETA CLIMA Instruction Manual

Do not repair or disassemble the air conditioning by yourself. Unqualified repair will lead to
failure of the warranty card, and may cause damage to users or their properties.
Problems
The air
conditioning does
not work.
The cooling effect
is not good

TROUBLESHOOTING

Reasons
There is no electricity.
The overflow indicator displays
"FL".
The ambient temperature is too
low or too high
In cooling mode, the room
temperature is lower than the set
temperature; in heating mode,
the room temperature is higher
than the set temperature.
In dehumidification mode, the
ambient temperature is low.
There is direct sunlight.
Doors or windows are open;
there are a lot of people; or in
cooling mode, there are other
sources of heat.
The filter screen is dirty.
The air inlet or outlet is blocked.
Solutions
Turn it on after connecting it to a
socket with electricity.
Discharge the water inside.
Recommend to use the machine
in at the temperature of 7-35 ℃
(44-95 ℉).
Change the set temperature.
The machine is placed in a room
with an ambient temperature of
greater than 17 ℃ (62 ℉).
Pull the Curtain.
Close doors and windows, and
add new air conditioning.
Clean or replace the filter screen.
Clear obstructions.
31