Rigid Industries E Series Mounting Instructions page 4

Glove box tab released.
step 4
In order to get the switch outputs connected to the pass through wiring that
terminates under the hood for Step 7, you need to make the connections below
and behind the glove box.
There are 2 wires that are exiting from the wiring harness provided with your
light bar; red and black. The red a wire will be mated with a preinstalled OEM
wire from Ford® by following the wiring diagram and colors below based upon
which auxiliary switch you would like to use. The black wire is the ground.
Switch Wire Color
Aux switch 1
Aux switch 2
Aux switch 3
Aux switch 4
Wiring bundles after access panel is removed.
Yellow
CONNECT TO
Green/Brown
CONNECT TO
Violet/Green
CONNECT TO
Brown
CONNECT TO
Through Dash Wire Color
Red
Green
Blue
Purple