Table of Contents
Advertisement
3. In
MENU:
Set AF Frame to "1-point" and Digital Zoom to "Off."
Set AF-Point Zoom to "Off" and Set Servo AF to "On."
Set Continuous AF to "Off" and AF-assist Beam to "Off."
In the Flash Control Built-in Flash Settings Menu, set Flash Mode
to "Auto", Shutter Sync. to "1st-curtain", Red-eye Corr. and Red-eye
Lamp to "Off."
Set Review Image after Shooting to "8 sec." and Display Info to
"Off."
Set Blink Detection and Night Display to "Off."
4. In
MENU
Set Date/Time and Time Zone.
Set Eco Mode to "Off."
In the Power Saving Menu, set Auto Power Down to "Off" and
Display Off to "3 min."
Set Touch Operation to "Off."
Insert and Format a compatible memory card.
5. In FUNC./SET MENU:
Set DR Correction to "Off" and White Balance to "Auto" or
"Underwater." For best results, use manual
Balance and reset for each working depth.
Set Drive Mode to "Single Shot
Set Metering to "Center Weighted Avg
Set ND Filter to "Off."
Set Image Type to "JPEG 13M" and Image Compression to "L."
Set Image Quality to "Superfine" and Movies to "FHD/30P."
6. Set ISO to 200.
7. Activate Macro mode
image is overexposed, use "-" Flash Exposure Compensation
and/or back away, zoom in, and then reshoot.
."
when shooting close-up subjects. If the
Custom White
."
7
Advertisement
Table of Contents
