Important Safety Information - Clas Ohlson JF8010-UK Instruction Manual

LED Set
Article number: 18-2019
Please read the entire instruction manual before using and save it for future
use. We apologise for any text or photo errors and any changes of technical
data. If you have any questions concerning technical problems please
contact our Customer Service Department (see address on reverse.)

Important safety information

These LED spotlights operate on low voltage (1 V). Never connect LED
spotlights directly to the mains.
The enclosed transformer has a 1 V output, so it is safe to install these
LED spotlights yourself. Disconnect the transformer from the socket before
assembling the cables and LED spotlights.
Mount the transformer so that it is not exposed to humidity or steam.
The enclosed transformer provides an output voltage of 1 V that is safe to
work with, but bear this in mind:
• The transformer, the outlet it is connected to and the junction box MUST
be mounted on a dry and well protected location indoors. Do not expose
any included components to liquids of any kind.
• The transformer contains no parts that might need adjusting or are
replaceable. It must be destroyed if it is defective.
• Do not modify the transformer or any component connected to it.
• Never exceed the recommended number of connected LED spotlights
that may be connected safely to the transformer. This set can be
expanded to ten LED spotlights of the same kind (our art. no. 6-588).
• Never overload the transformer; consult with a professional if you are
not sure.
Model: JF8010-UK
36-3587

JF8010