Clas Ohlson GS-LTL2060 Instruction Manual

LED Tail Light
Art.no 36-4979 Model GS-LTL2060
Please read the entire instruction manual before using the product
and save it for future reference. We reserve the right for any
errors in text or images and any necessary changes made to
technical data. If you have any questions regarding technical
problems please contact our Customer Services.
Assembly
This tail light is E-marked, watertight and approved for use on
utility and boat trailers.
Note: Bear in mind that this tail light must be positioned in
the same place and at the same angle as the previous light
in order for the trailer to meet legal requirements.
1. Use the hole drilling template to mark out the position for
the holes if new ones need to be drilled. Be careful not to
damage any hidden electrical wires when drilling.
2. Try to keep the electrical connection between the tail light
and the car as watertight as possible. Follow this
wiring guide:
Cable colour Function
Red Break light
Brown Tail light
Yellow Indicator
White Earth
GREAT BRITAIN • customer service tel: 08545 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
Note:
The low current draw required to power the new LED trailer
lights can "fool" the electrical system of some modern vehicles.
This can cause fault warning lights to activate, indicators to
flash too quickly or the lights to stop working altogether.
These symptoms can be aleviated by the use of load resistors
or flash relays designed for LED lighting systems. Refer to your
vehicle's instruction manual.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local authority.
Specifications
Voltage 12 V DC
Wattage Indicator/break light 1.6 W
Tail light 0.5 W
Size 150 × 80 × 23 mm