Clas Ohlson Plasma Ball Quick Start Manual

Plasma Ball
Art.no 36-7651
Please read the entire instruction manual before using the product
and then save it for future reference. We reserve the right for
any errors in text or images and any necessary changes made
to technical data. In the event of technical problems or other
queries, please contact our Customer Services.
Safety
This product is intended for indoor use only.
• Neither the product nor its mains adapter may be
dismantled or modified in any way.
• Before you use the product ensure that you check it,
especially the glass, for signs of damage or cracks.
• Never use the product or the mains adapter if it is in any
way damaged or malfunctioning.
• Repairs must only be carried out by qualified service
technicians and only using genuine spare parts.
• The product must only be connected to the included mains
adapter or an adapter with the same specification.
• Do not place the product where it could fall into water or
other liquid.
• Never subject the product to impacts or shocks.
• The product can cause interference and interfere with
the operation of electrical equipment in the vicinity.
• Long-term contact on a specific point can cause the glass
to get hot.
• Do not cover the product.
• The product is not a toy. Keep it out of reach of children
under the age of 12.
• The product is made of glass and should be handled with care.
UNITED KINGDOM • customer service tel: 020 8247 9300 e-mail customerservice@clasohlson.co.uk internet www.clasohlson.co.uk postal 10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
• The product is designed for decorative purposes only and is
not suitable as a light source for a room.
• The darker the surroundings, the more dramatic the light
effect will be.
• It is completely normal for the ball to make a low buzzing
noise during use.
Product description
1 2 3
1. [ OFF/ON/AUDIO ]
2. Mains adapter connection
3. Mains adapter
Installation
1. Unpack the plasma ball carefully and stand it on a firm,
flat surface.
2. Connect the mains adapter to the plasma ball and then to
a wall socket.
Instructions for use
Slide the selector switch to the desired setting:
• [ ON ]: The light beams will dance around the inside
of the globe. Place your fingers against the glass and
the beams will move towards them.
• [ AUDIO ] (Sound-responsive mode): The light beams will
move in time with the surrounding sounds such as the beat
of your music.
• [ OFF ]: The voltage is disconnected.
Care and maintenance
Unplug the mains adapter from the wall socket before wiping
the product clean with a dry cloth.
Troubleshooting guide
No light. • Make sure that the mains lead is undamaged
and is securely connected to both
the electrical socket and the device.
• Is the wall socket energised?
• Check that the power switch is set to [ ON ].
Responsible disposal
This symbol indicates that the product should not
be disposed of with general household waste.
This applies throughout the entire EU. In order
to prevent any harm to the environment or
health hazards caused by incorrect waste
disposal, the product must be handed in for
recycling so that the material can be disposed
of in a responsible manner. When recycling your
product, take it to your local collection facility
or contact the place of purchase. They will
ensure that the product is disposed of in
an environmentally sound manner.
Specifications
Mains adapter Input 100–240 V AC, 50/60 Hz
Output 12 V DC, 500 mA
24.2 × 15 × 15 cm
Dimensions