Clas Ohlson JF8010-UK Instruction Manual page 7

Fig. 4
. Insert sensor into the hole (see Fig. ).
8. Fasten the dusk to Dawn sensor in the hole.
9. Remove as many blanking plugs in the junction box as you have LED
spotlights. Insert the connectors as far as you can into the junction
box. The + sign on a connectors should match with the + marking on
the junction box (See Fig.5). Blanking plugs should be mounted on all
unused sockets on the junction box to protect against moisture.
Blanking plug
Fig. 5
Clear cap
Sensor
JUNCTION bOx

Lead from Dusk to
Dawn sensor
Leads from LED spotlights