Removing The Tg1301 Sub-Assembly - Unic Tango ST Duo Technical Note

72

♦ Removing the TG1301 sub-assembly

Note: Perform this operation after having removed the grille from
the machine (see «Replacement of the TFT screen» part, p:62).
Unscrew the milk outlet on the nozzle.
1
Disconnect the boiler steam tube
3
Disconnect the outlet tube from the EVNR
(3-way solenoid valve)
5
Unscrew the coffee grounds drawer stop,
which also serves to hold it (tool: 3mm
Allen key)
2
Disconnect the steam outlet tube from
the EVRP1
4
Disconnect the milk tube from the EVLCF
6