Model Identification Code - EBARA 1GP Operating And Maintenance Manual

14. MODEL IDENTIFICATION CODE

STANDARD PRESSURE BOOSTER SET TYPE KEY
3 GPE S J
Presence of pump(s) in stand-by
Type of pressure boost set
No. of total main pumps (including any pumps in stand-by)
CONFIGURED PRESSURE BOOSTER SET TYPE KEY
3 x MATRIX 5-6/1.3I
Pump model
No. of pumps
MATRIX 5-6/1.3I MFC
Type of control
Main pump model
Presence of pilot pump
x EPT
Type of control
304 H P25
Nominal set pressure
Special material conf.
Special material
EPM Control panel for fixed speed with single-phase power supply (EP/EP-E)
EPT Control panel for fixed speed with three-phase power supply (EP/EP-E)
SP-EFC Control panel with single inverter SP-EFC
SP-MFC Control panel with multi inverter SP-MFC
E-Drive MT Control device with E-Drive inverter with single-phase power supply
E-Drive TT Control device with E-Drive inverter with three-phase power supply
E-SPD MT Control device with E-SPD inverter with single-phase power supply
E-SPD TT Control device with E-SPD inverter with three-phase power supply
E-Power Control device with E-Power inverter
Hydrocontroller Control device with hydrocontroller inverter
ENGLISH
XXX
Variant codes for special products
P25 PN25
P40 PN40
M Only manifolds
H Hydraulic
F Complete (H+base)
O Brass valves
OT Galvanised manifold + brass valves
304 AISI 304
316 AISI 316
- EP/EP-E control panel
EFC Single inverter SP-EFC
MFC Multi inverter SP-MFC
EDM E-Drive MT
EDT E-Drive TT
ESPM E-SPD MT
ESPT E-SPD TT
EPW E-Power
HYD Hydrocontroller
J With pilot pump
S
Dimensioned with pump(s) in stand-by
GP Fixed speed
GPE Variable speed
PN standard (10÷16)
18