Westell Technologies Wirespeed 2100 User Manual page 107

Dual connect nat router
Table of Contents

Advertisement

User Guide
P
Private LAN
This page contains the settings that control how the ADSL router interacts with the local devices connected to the
router. It is not recommended that these settings be changed. The following settings are displayed.
Private LAN DHCP Server
Enable
Private LAN Enable
Modem IP Address
Subnet Mask
DHCP Start Address (If
DHCP is enabled for
Private LAN)
DHCP End Address (If
DHCP is enabled for
Private LAN)
DHCP Lease (If DHCP is
enabled for Private LAN)
Protocol
Protocol
Public LAN
This screen contains the settings that control how the ADSL router interacts with the local devices connected to the
router. It is not recommended that these settings be changed. The following settings are displayed.
Public LAN DHCP Server
Enable
Public LAN Enable
Modem IP Address
Subnet Mask
030-300198 Rev. D
Private LAN
Dynamic Host Configuration Protocol (DHCP) is an Internet standard that
allows the ADSL router to automatically assign IP addresses to devices
connected on the LAN network. It is advised that this is enabled for Private
LAN.
This setting enables the Private NAT'ed interface. It is advised to leave this
enabled.
This controls the IP address that the ADSL router uses for local
communication.
This setting specifies the subnet mask to use to determine if an IP address
belongs to your local network.
This setting specifies the start of the IP address pool that the modem uses to
assign IP addresses to local devices.
This setting specifies the end address of the IP address pool used for automatic
configuration of local devices.
This setting specifies the DHCP lease time.
Protocol
This screen informs the Router which networking protocol to use when
communicating with your ISP. Your ISP provides this information.
Public LAN
Dynamic Host Configuration Protocol (DHCP) is an Internet standard that
allows the ADSL router to automatically assign IP addresses to devices
connected on the LAN network. It is advised that this is enabled for Private
LAN.
This setting enables the Public interface. This feature allows a global subnet to
exist behind your modem.
This controls the IP address that the ADSL router uses for local
communication.
This setting specifies the subnet mask to use to determine if an IP address
belongs to your local network.
WireSpeed Dual Connect NAT Router
105
March 2003

Advertisement

Table of Contents
loading

Table of Contents