Table of Contents
Advertisement
User Guide
3. Windows ME: The window below confirms that the PC has finished loading the drivers. See Figure 20. Click
Finish.
4. Windows ME: When the System Settings Change screen appears, the USB drivers are installed properly. See
Figure 21. Click Yes.
Congratulations! You have completed the software installation for the USB drivers. After the computer has
restarted, the Router is ready for use. Refer to the Internet Service Provider (ISP) installation manual to install the
software required for your Internet connection. You must now go to section 7.
030-300198 Rev. D
Figure 20. Found New Hardware
Figure 21. Restart the Computer
18
WireSpeed Dual Connect NAT Router
March 2003
Advertisement
Table of Contents
