Table of Contents
Advertisement
User Guide
9.4
Advanced Service Configuration
You can set up additional Service Configuration options for your Dual Connect Router that allow you to enter the
port forwarding and trigger ports ranges of your choice. Go to Configuration at the homepage menu and select
Service Configuration.
When you click on define custom service in the Service Configuration screen, the Custom Service screen will
guide you through the steps of creating an advanced NAT service entry via the define custom service button.
NOTE: Westell strongly recommends that you do not change any values in this section. If you experience any
problems, please reset your Router via the external hardware re-set button or the procedure defined under the
Maintenance menu.
Port Forwarding Ranges of Ports
Trigger Ports
030-300198 Rev. D
This option allows you to forward a range of WAN ports to an IP address on
the LAN.
This option allows you to forward a range of ports to an IP address on the
LAN only after specific outbound traffic.
71
WireSpeed Dual Connect NAT Router
March 2003
Advertisement
Table of Contents
