IDEAL APP SBE Series Assembly Instruction

SBE & SBX
® ®
Assembly instruction for SBE160, SBE320, SBX175 and SBX350 Series
two pole battery connectors with option for auxiliary contacts.
Contains one (1) housing and two (2) contacts.
1. CONNECTOR RATINGS
Series Amperes Volts AWG
SBE160 160
SBE320 320
SBX175 175
SBX350 350
2. TOOLING CHART
Contact Wire
Part Number Size
6384G2 35 mm²
6384G1 1/0 AWG
6354 2/0 AWG
6354 2/0 AWG
6355 3/0 AWG
6356 4/0 AWG
6358 300 MCM
1341G1 50 mm²
1341G2 70 mm²
1341G3 95 mm²
CAUTION: When using cable with jacket diameter less
than 0.423 inches (11mm) on the SBE160 / SBX175 and
less than 0.709 inches (18mm) on the SBE320 / SBX350
thin wall heat shrink insulation should be evenly applied
across the cable and contact barrel junction to insure
finger protection.
3. REDUCING BUSHING
Bushing Wire Size
Part Number AWG (mm²)
5687 #1 (42.4)
5690 #2 (33.6)
5693 #4 (21.2)
5663 #6 (13.3)
5648 #10 (5.3)
5920 N/A (16)
5918 1/0 (53.5)
HEAT SHRINK INSULATION SPECIFICATIONS
Connector
Series
SBE320 / SBX350
SBE160 / SBX175
Connectors
Max Cable Size
mm²
150 1/0 50
150 300mcm 150
600 1/0 50
600 300mcm 150
Pneumatic
Bench Tool + Die +
1387G1
1387G2
1387G1
1387G2
TBD
TBD
TBD
1387G2
1387G2
TBD
For Use With
SBE160 / SBX175 SBE320 / SBX350
6384G1 contact
6384G1 contact
6384G1 contact
6384G1 contact
6384G1 contact
6384G2 contact
N/A
Nominal Minimum
Tubing Size Length
0.75 in (19mm) 2.0 in (51mm)
0.50 in (12.7mm) 2.0 in (51mm)
FOR INSTALLATION BY A QUALIFIED ELECTRICIAN IN
ACCOR
DANCE WITH NATIONAL AND LOCAL ELECTRICAL CODES
AND THE FOLLOWING INSTRUCTIONS. THE SUITABILITY OF THIS
TYPE OF TERMINATION MUST BE EVALUATED BY UNDERWRITERS'
LABORATORIES, INC. AND CANADIAN STANDARDS. ASSOCIATION
FOR THE END USE APPLICATION: Assemble contacts to the cables
according to the equipment manufacturer's assembly instructions. The
following instructions are supplied as a reference. Please note: instruc-
tions are included with each crimp tool for proper use.
Locator or Hydraulic Tool
1388G3 1389G3
1303G2 1304G2
1388G2 1389G2
1303G12 1304G28
TBD TBD
TBD TBD
TBD TBD
1303G8 1304G27
1303G7 1304G27
TBD TBD
[3.2] 0.12 MIN
[19.0] 0.75 MIN
6354 contact + 5918 bushing
6354 contact + 5918 bushing
6354 contact + 5918 bushing
6354 contact + 5918 bushing
6354 contact + 5918 bushing
6394 contact
6354 contact
Maximum
Wall Thickness
0.030 in (.76mm)
0.025 in (.63mm)
Dieless
1368
1368
1368
1368
1368
1368
1368
1368
1368
1368
[3.2] 0.12 MIN