Advertisement
7. Cable ties are supplied to secure the auxiliary leads or cable to one of the main power cables. Leave slack or loop
in leads to Powerpole
®
as shown in Figure 2.
8. To remove auxiliary housings, punch out retaining pins from bottom of the connector housing with an 0.06 inch
(1.5 mm) diameter steel rod or pin driver. Pull auxiliary housings out of the SBE
contact insertion-extraction tool kit (part number 111038G2), to remove contacts from auxiliary housings see Figure 3.
WARNING: UTMOST CAUTION SHOULD BE USED WHEN WORKING ON LIVE CONNECTOR CONTACTS
UL and CSA Reference - These connectors are recognized under the component program of Underwriters'
Laboratories, File E26226, as well as Canadian Standards Association, Report LR25154.
PATENTS AND TRADEMARKS
This product is covered by the following patents: U.S. 3,794,957; U.K. 1,443,819; France 73,44153; Italy 1,000442;
Japan 885,802; South Africa 74/0939; Canada 990,821. Other U.S. and foreign patents pending.
© 2017 Anderson Power Products, Inc. All rights reserved.
APP
, Anderson Power Products
®
Anderson Power Products, Inc.
HEADQUARTERS: Anderson Power Products®, 13 Pratts Junction Road, Sterling, MA 01564-2305 USA T:978-422-3600 F:978-422-0128 | EUROPE:
Anderson Power Products® Ltd., Unit 3, Europa Court, Europa Boulevard, Westbrook, Warrington, Cheshire, WA5 7TN United Kingdom T: +44 (0) 1925 428390
F: +44 (0) 1925 520203 | ASIA / PACIFIC: IDEAL Anderson Asia Pacific Ltd., Unit 922-928 Topsail Plaza, 11 On Sum Street, Shatin N.T., Hong Kong T:+(852)
2636 0836 F:+(852) 2635 9036 | CHINA: IDEAL Anderson Technologies (Shenzhen) Ltd., Block A8 Tantou Western Industrial Park, Songgang Baoan District,
Shenzhen, PR. China 518105 T: +(86) 755 2768 2118 F: +(86) 755 2768 2218 | TAIWAN: IDEAL Anderson Asia Pacific Ltd., Taiwan Branch, 4F.-2, No.116,
Dadun 20th St., Situn District, Taichung City 407, Taiwan (R.O.C.) T: +(886) 4 2310 6451 F:+(886) 4 2310 6460
www.andersonpower.com
All Data Subject To Change Without Notice
contacts when applying cable ties. Wraps to be placed approximately 1 inch (25.4 mm) apart
Loop Wire
[25]
1.0
, SBE
, SBX
®
®
2017-0069
Figure 2
, SBO
, Powerpole
and the APP Logo are registered trademarks of
®
®
®
/SBX
connector housing. Use
®
®
Figure 3
1S6556 REV 3,
ASM-SBE/SBX
Advertisement
