Starkey Synergy Quick Tips

User controls

Advertisement

QuickTIPS

USER CONTROLS

PRODUCT AVAILABILITY:
Launch
Inspire
X, then connect hearing devices. Refer to the Initial Fit
Protocol QuickTIPs for information on getting started.
The User Control Configuration demo box will appear upon first fit. Select
Show Demo
for demonstration of user control configuration options,
or select
Don't Show Again
navigation bar to adjust user controls during subsequent programming.

USER CONTROL CONFIGURATION

1. Drag any
user control
a
gesture
on the right. User control options include:
» Volume
» Memory
» Tinnitus
» Mute
» Balance Control (Muse iQ and Muse BiCROS devices only)
NOTE: An alert icon will appear if the tinnitus user control is enabled
but the tinnitus stimulus is disabled. Refer to the Tinnitus QuickTIP
for additional information.
gesture functionality.
Select
default gesture options include:
» Right increase, left decrease
» Right increase and decrease
» Left increase and decrease
»Sprinkler decrease
NOTE: Select Preferences, then
control options, if desired.

VOLUME CONTROL RANGE AND STEP SIZE

1. Select
VC Range and Step
2. Select
pins
to adjust VC Range.
3. Select
Step Size
of 2dB or 4dB.
NOTE: Inspire software will not allow for adjustments to VC Range
and Step Size if volume control is not enabled in User Control
Settings.
Synergy Devices with User Controls
and
Close.
Select
User Controls
you wish to enable from the left and drop it on
If fitting a device with a push button,
General
to display additional user
Size, if volume control is enabled.
on the left
User Controls
VC Range and Step Size

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Synergy and is the answer not in the manual?

Questions and answers

Summary of Contents for Starkey Synergy

  • Page 1 QuickTIPS USER CONTROLS PRODUCT AVAILABILITY: Synergy Devices with User Controls Launch Inspire X, then connect hearing devices. Refer to the Initial Fit Protocol QuickTIPs for information on getting started. The User Control Configuration demo box will appear upon first fit. Select...
  • Page 2 Reset Levels on Memory Change 1. Select Print in User Control Settings to print the Device Guide. This generates a report with user control information specific to the connected devices. Device Guide © 2017 Starkey. All Rights Reserved. 4/17 MISC4727-00-EE-ST...

Table of Contents