Diagnostics Handset; The External Diagnostics Handset - Lenovo ThinkSystem SR645 System Manual
Hide thumbs
Also See for ThinkSystem SR645:
- Setup manual (188 pages) ,
- Quick start (2 pages) ,
- Maintenance manual (284 pages)
Table of Contents
Advertisement
Diagnostics Handset
The External Diagnostics Handset
Where to connect the external diagnostics handset
Connect the external diagnostics handset to the front of your server. Depending on your server model, the
external diagnostics connector is located on the front I/O assembly or on the rack latch.
1
The external diagnostics handset that can be connected to the server with an external cable.
2
The magnetic bottom with which the device can be attached to the top or side of the rack. This is helpful
and can free up both hands for certain service tasks.
3
The external diagnostics connector on the front of the server that can be used to connect an external
diagnostics handset.
Note: Pay attention to the following steps when unplugging the external diagnostics handset:
Step 1. Press the plastic clip on the plug in the shown direction.
Step 2. Gently pull out the cable from the connector while keeping the clip pressed down.
26
ThinkSystem SR645 System Option Manual
Advertisement
Table of Contents
