Installation
Observe environmental conditions:
• No condensing air humidity
• No splash water
The media to be dispensed may be negatively affected.
Space requirements
Installation
Install the dosing unit horizontally and in an elevated position (above the working height)!
Pneumatic connection
Connect the unit via the quick coupling piece (14) to the back of the device with the compressed-air hose
(20) to the compressed air supply (operating pressure max. 6 bar). If using a vacuum and there are power
fluctuations of more than 0,5 bar, it is imperative to install a pressure reduction valve upstream and to set it
to the lowest possible supply pressure. When processing products that react to moisture, a water-separat-
ing filter unit is recommended.
8