Table of Contents
Advertisement
Description of functions
Basic functions
Pressure: Manually set by turning the pressure regulator and controls the dosing pressure. Indicator on
display (5).
Vacuum: Manually set by turning the vacuum regulator (3) and prevents dripping during pauses in dosing.
Dosing time: Manually set by pressing the arrow keys (9+10) and controls the dosing duration. Indicator
on display (5).
(Only possible when the operating mode is set to Time)
Parameters
Operating mode
Time:
Duration:
Repetition:
Triggering
Manual:
External:
Relay
On:
Off:
Unit of pressure
bar:
PSI:
Language
Contrast
The arrow keys can be used to set the display contrast.
Special functions
Default parameters
If the menu key (7) is pressed at the same time the device is switched on, the default
parameters are loaded and saved. A signal tone confirms the completed process.
Dosing duration based on the time entered.
Dosing continues as long as the button is pressed or there is an external signal.
Repeats the starting pulses for dosing based on the time set as long as the button is
pressed or there is an external signal.
Dosing is triggered by manually pressing a button (foot switch).
Dosing is triggered by external control (PLC).
The starting pulse and corresponding pause time are output to the relay.
No output to the relay.
Display of pressure in bar
Display of pressure in PSI
Display of texts in:
• German • French • Italian • English
7
Advertisement
Table of Contents
