Technical Data - FIP FLS M9.10 Manual

DESCRIPTION
The new FLS M9.10 is a powerful monitor designed to manage analog and
frequency signals (or two analog signals) from every types of device which
provide a 4-20mA or a frequency output. M9.10 is equipped with a wide full
graphic display 4" which shows measured values clearly and a lot of other
useful information. Moreover, due to a multicolor display plus a powerful
backlight, measurement status can be determined easily from afar also.
A tutorial software guarantees a mistake-proof and fast set up of every
parameters. Calibration of 4-20mA input can be performed just fixing 2
points as well as 1 point or using a reference value through a new "in-line
calibration". Calibration of frequency input can be performed just fixing
installation features or using a reference value through a new "in-line
calibration". Two independent 4-20mA outputs are available to remote
measures to external devices. A proper combination of digital outputs (2 x SSR
and 2 x relays) allows customized setups for any process to be controlled.
CONNECTIONS TO INSTRUMENTS
F3.00
M9.10 X
ULF
M9.10 X

TECHNICAL DATA

General
• Associated sensors: FLS hall effect flow sensors with frequency output, FLS
F6.60 flow magmeters family and every devices which generate a passive
or active 4-20mA signal.
• Materials:
- case: ABS
- display window: PC
- panel & wall gasket: silicone rubber
- keypad: 5-button silicone rubber
• Display:
- LC full graphic display
- backlight version: 3-colours
- backlight activation: User adjustable with 5 levels of timing
- update rate: 1 second
- enclosure: IP65 front
• Frequency input range (frequency): 0÷1000Hz
• Frequency accuracy (frequency): 0,5%
• Analog input range (frequency): 3,8÷21,0mA
• Analog input accuracy (frequency): 0,01mA
2
F3.20 F6.30
X -
pH/
F3.80
ORP200 ORP400
X X
F3.10 F3.05
X -
pH/ pH/ pH/
ORP600 ORP800
X X
F6.60 F6.61
X X
C150/ C100/
200 C300
X - -
F111
X
C6.30
-