Table of Contents
Advertisement
OPERATIONAL
OVERVIEW
The M9.10 Dual Analog Input Monitor and Transmitter
features a full graphic display and a five-button keypad
for system set-up, calibration and operation. Full graphic
display has a white backlight during standard conditions,
a red backlight in case a set alarm is activated (MAX,
MIN, WINDOW IN, WINDOW OUT MODE: always with
priority), a green backlight in case a external device
control is activated (PROPORTIONAL FREQUENCY,
PROPORTIONAL PULSE, TIMED MODE, ON-OFF MODE)
FIRST INPUT:
SECOND INPUT:
CURRENT
CURRENT
SET THE
SET THE
FOLLOWING
FOLLOWING
PARAMETERS
PARAMETERS
INPUT UNIT
INPUT UNIT
INPUT 4 mA*
INPUT 4 mA*
INPUT 20 mA*
INPUT 20 mA*
* For negative values firstly set the corresponding positive value
and then move the position indicator beyond the last position on
the right using
to get the minus sign (not available for flow measurement)
1 SSR , 3 RELAY, 4-20 mA 1 can be assigned to the first input.
2 SSR, 4 RELAY, 4-20 mA 2 can be assigned to the second input.
** Delta visualization can be activated in Options Menù.
***
for more info about Outputs
**** Use the same Engineering Unit on both INPUTS
10
VIEW LEVEL
IN1 - IN2
(Delta IN1-IN2)**
IN 2 – OUT mA 2
IN 1 – OUT mA 1
Output Settings ***
MENU DIRECTORY
Settings
Calibration
Outputs
Options
View data
Adjust
input mA
Advertisement
Table of Contents
