FIP FLS M9.10 Manual page 12

OPERATIONAL
OVERVIEW
The M9.10 Dual Analog Input Monitor and Transmitter
features a full graphic display and a five-button keypad
for system set-up, calibration and operation. Full graphic
display has a white backlight during standard conditions,
a red backlight in case a set alarm is activated (MAX,
MIN, WINDOW IN, WINDOW OUT MODE: always with
priority), a green backlight in case a external device
control is activated( PROPORTIONAL FREQUENCY,
PROPORTIONAL PULSE, ON-OFF MODE, TIMED MODE).
FIRST INPUT: SECOND INPUT:
CURRENT FREQUENCY
SET THE
FOLLOWING FOLLOWING
PARAMETERS PARAMETERS
K FACTOR
INPUT UNIT
VALUE
INPUT 4 mA FLOW UNIT
(a)
INPUT 20 mA VOLUME UNIT
(a)
* Resettable totalizers can be reset using
** Delta visualization can be activated in Option Menù.
*** for more info about Outputs
(a)
For negative values firstly set the corresponding positive value and then move the
position indicator beyond the last position on the right using
(not available for flow measurement)
(b)
K factor is value of pulses/liter (available on technical manual of connected FLS
sensor)
1 SSR , 3 RELAY, 4-20 mA 1 can be assigned to the first input.
2 SSR, 4 RELAY, 4-20 mA 2 can be assigned to the second input.
**** Use the same Engineering Unit on both INPUTS
12
SET THE
(b)
on view level (only with frequency input).
VIEW LEVEL
IN1 - IN2
(Delta IN1-IN2)**
IN 2 – INFINITE TOTALIZER -
RESETTABLE TOTALIZER *
IN 2 – OUT mA 2
IN 1 – OUT mA 1
Output Settings **
to get the minus sign
MENU DIRECTORY
Settings
Calibration
Outputs
Options
View data
Adjust
input mA