SwissPhone s.QUAD Manual

Bluetooth tips

s.QUAD Bluetooth Tips

Connecting

s.QUAD to

Smartphones

Flow

Change Settings

Introduction

In most cases, connecting s.QUAD to smartphones or tablets work right away.

Sometimes however a connection setup will not work immediately. This document

will guide you in these cases, helping to enable the connection. Please let us know

if this document was helpful for you, or not and which areas of the documentation

should be improved. We are looking forward to receiving your feedback!

Setup Connection

Please follow the sequence outlined in the flow below. In case you reach a

rectangle with «bars» on the sides, please jump to the corresponding chapter

inside this document.

After following this flow, hopefully you have successfully connected your

Smartphone and s.QUAD. Now you can read out and change some settings using

the s.QUAD App (in as far as allowed using PSWplus). More on this in the

following chapter.

Once s.QUAD is connected to a smartphone, please open the s.QUAD App. After a

quick time the button at the bottom of the app will turn blue. Now you can read the

current settings from s.QUAD.

www.swissphone.com

Table of Contents

Do you have a question about the s.QUAD and is the answer not in the manual?

Page 1 After following this flow, hopefully you have successfully connected your Smartphone and s.QUAD. Now you can read out and change some settings using the s.QUAD App (in as far as allowed using PSWplus). More on this in the following chapter.
Page 2 Usually in “Settings  Bluetooth”. Here you can enable / disable Bluetooth. In case the menu is missing, you may add it to s.QUAD using PSWplus. Simply “drag & drop” it to the appropriate place inside “Active menu”.
Page 3 Activate Bluetooth on Smartphone Activate Bluetooth On first start of s.QUAD Android App, it will ask you to enable Bluetooth. We Smartphone recommend you confirm this question. Otherwise, you may enable Bluetooth following the steps outlined below: Android Please enter “Settings” (gear icon), then navigate to Bluetooth and turn it on. On some Android devices you may find Bluetooth in “Connections”...