Wirings To The Mains - Intimus HDD Gladiator Instruction Manual For Use And Maintenance

4.3 WIRINGS TO THE MAINS

IMPORTANT NOTICE
This action must be carried out by a qualified technician (electrician) in
full compliance with the Standard in force.
Before connecting the machine to the mains it is necessary to:
• check that mains voltage and frequency are correct;
• check the earthing plant for efficiency at the current socket;
• max. variation of mains voltage: ±10%;
• max. variation of mains frequency: ±2%;
Use the feeding cable with the section indicated in the relevant table in the Electrical
•
Equipment list;
• The feeding cable (three-phase + PE) is connected, according to the regulations in
force in the user's Country, to the relevant clamp-box indicated in the electrical drawing;
• Check that the socket where the equipment must be plugged into has a higher or,
however, a sufficient power compared to the maximum power absorbed by the
machine;
• Check that the equipment does not lay on the feeding cable;
• Protect the power supply line from excess voltage (e.g. atmospheric electricity);
• Protect the power supply line from overcurrent with opportunely co-ordinated devices
(e.g. automatic breakers);
• a neutral conductor is not required.
95399 1 11/18
INDUSTRIAL SHREDDER
Instruction for use and maintenance
50 / 83