AXIS C8033 Network Audio Bridge
Troubleshooting
The product is accessible locally but not externally
Router configuration
Firewall protection
Default routers required
To configure your router to allow incoming data traffic to the Axis product, enable the NAT-traversal
feature which will attempt to automatically configure the router to allow access to the Axis
product, see NAT traversal (port mapping) for IPv4 on page 30. The router must support UPnP
Check the Internet firewall with your network administrator.
Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
36
®
.