Related Manuals for Axis C8033
Summary of Contents for Axis C8033
- Page 1 AXIS C8033 Network Audio Bridge User Manual Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...
-
Page 2: Safety Information
AXIS C8033 Network Audio Bridge Safety information Safety information Hazard levels DANGER Indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING Indicates a hazardous situation which, if not avoided, could result in death or serious injury. -
Page 3: Table Of Contents
AXIS Audio Player ........ -
Page 4: Product Overview
• Resetting the product to factory default settings. See page 34. • Connecting to an AXIS Video Hosting System service. See page 29. To connect, press and hold the button for about 3 seconds until the Status LED flashes green. - Page 5 AXIS C8033 Network Audio Bridge Product overview Green Steady green for normal operation. Amber Steady during startup and when restoring settings. Slow flash for failed upgrade. Red/Green Flashes fast between red/green when identifying an audio device is selected. Available from A1 Security Cameras...
-
Page 6: How To Access The Product
How to set the root password To access the Axis product, you must set the password for the default administrator user root. This is done in the Configure Root Password dialog, which opens when the product is accessed for the first time. -
Page 7: How To Set Up The Product
How to set up the product How to set up the product The Axis product can be configured by users with administrator rights. Go to Setup > Basic Setup > 1 Users to administer users. • Administrators have unrestricted access to all settings. -
Page 8: Audio
1. Use the slider System under Volume to set system volume for max announcement sound level 2. Set volume in Axis Audio Player for the background music sound level. 3. If needed use the sliders beside the followers to adjust the balance between speakers by decreasing the individual volume for the louder speakers and repeat step 1 and 2. -
Page 9: System Settings
• Half-duplex –Audio can be transmitted to and from the Axis product but only in one direction at a time. • Simplex – Speaker only - Audio is transmitted from a client to the Axis product. This is the default audio mode. -
Page 10: Clips
Audio Clip List Audio clips can be played when an event occurs. Audio clips are created by uploading a sound file to the Axis product. To add, play, download, modify or remove audio clips, go to Audio > Audio Clips. For more information see the online help • Add –... - Page 11 AXIS C8033 Network Audio Bridge Audio 1. Select an audio clip from the list. 2. If you want to play several clips with similar file names in an random order, replace parts of the file name in the audio clip field with an asterisk. For example: to play the audio clips sound01.mp3 and sound02.mp3 write sound* in the audio clip field.
-
Page 12: Detectors
Audio Alarm Level Event types in the Axis product can be set to use this level as a trigger. Each individual event type can be configured to trigger if the sound level rises above, falls below or passes the set value. -
Page 13: Voice Over Ip (Voip)
The sessions can include voice and video elements. See About SIP Addresses on page 18. Before the Axis product can be used to make and receive calls, you need to configure the SIP settings. This includes enabling SIP , configuring the ports, and setting the rules for Network Address Translation (NAT) traversal. - Page 14 NOTICE TICE TICE Allowing incoming calls enables the AXIS product to accept calls from any device connected to the network. It is recommended to disable incoming calls for products that are accessible from public networks or the Internet. Note Even if you choose to not enable SIP , you can configure the SIP settings. But remember that when SIP is disabled, you cannot make or receive calls.
-
Page 15: The Account Settings Page
AXIS C8033 Network Audio Bridge Voice over IP (VoIP) Session Traversal Utilities for NAT (STUN) Session Traversal Utilities for NAT (STUN) is a client-server network protocol that enables the product to ask a STUN server on the Internet for a mapped public IP address. The STUN server response includes this IP address and port so that the client can use them in its SIP messages to other hosts and clients. - Page 16 Account Credentials • User ID – User ID is typically the extension or phone number assigned to the Axis product at the SIP server. It is also possible to use a SIP URI as a User ID if required by the SIP server.
- Page 17 AXIS C8033 Network Audio Bridge Voice over IP (VoIP) • Secondary SIP Server – The Axis product will try to register on the secondary SIP server if registration on the primary SIP server fails. Transport Settings • Enable SIPS – Select to use Secure Session Initiation Protocol (SIPS). SIPS uses the TLS transport mode to encrypt traffic. If you enable SIPS, you cannot select any other transport mode than TLS.
- Page 18 The domain name or registrar address (IPv4 address) of the receiving device. Important The Axis product’s VoIP functionality does not include support for IPv6. For more information about SIP , SIPS, and TLS, see Port Settings on page 14 and Transport Settings on page 17.
-
Page 19: About Applications
Manual installation — obtain the license key from the application vendor and upload the key to the Axis product To request a license, the Axis product serial number (S/N) is required. The serial number can be found on the product label and under System Options >... -
Page 20: Axis Audio Player
AXIS C8033 Network Audio Bridge About applications AXIS Audio Player The application AXIS Audio Player is included in this product. Use AXIS Audio Player to add, manage and schedule music playlists, streams and prerecorded announcements. How to add music and announcements in the library Drag and drop or browse to add music in the library. -
Page 21: About Events
For more information about available triggers and actions, see About triggers on page 21 and About actions on page 22. The following example describes how to set up an action rule to play an audio file when the Axis product receives an input signal from a video management system. -
Page 22: How To Add Recipients
Virtual inputs can, for example, be connected to buttons in the management system's user interface. • System System Ready – Triggers an action rule when the system is in state ready. For example, the Axis product can detect the system state and send a notification when the system has started. -
Page 23: How To Create Schedules
Optionally, select Use encryption to send emails over an encrypted connection. The server certificate can be validated using the certificates available in the Axis product. For information on how to upload certificates, see About certificates on page 27. -
Page 24: How To Set Up Recurrences
AXIS C8033 Network Audio Bridge About events How to set up recurrences Recurrences are used to trigger action rules repeatedly, for example every 5 minutes or every hour. To set up a recurrence: 1. Go to Events > Recurrences and click Add. -
Page 25: About Languages
About languages Multiple languages can be installed in the Axis product. All web pages including the online help will be displayed in the selected language. To switch languages, go to Setup > Languages and first upload the new language file. Browse and locate the file and click the Upload Language button. -
Page 26: About System Options
IP Address Filter IP address filtering is enabled on the page. Once enabled, the listed IP address are allowed or denied access to the Axis product. Select Allow or Deny from the list and click Apply to enable IP address filtering. -
Page 27: Date & Time
4. Check the box to enable IEEE 802.1X and click Save. Note For authentication to work properly, the date and time settings in the Axis product should be synchronized with an NTP server. See Date & Time on page 27. -
Page 28: Network
Basic TCP/IP Settings IPv4 Address Configuration By default, the Axis product is set to use IPv4 (IP version 4) and to obtain the IP address automatically via DHCP. The IPv4 settings are configured under System Options > Network > TCP/IP > Basic. - Page 29 To disable, clear the Enable AVHS box. Always - The Axis product will constantly attempt to connect to the AVHS service over the Internet. Once registered, the product will stay connected to the service. This option can be used when the product is already installed and it is not convenient or possible to use the one-click installation.
- Page 30 Host Name Configuration The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.
- Page 31 SOCKS is a networking proxy protocol. The Axis product can be configured to use a SOCKS server to reach networks on the other side of a firewall or proxy server. This functionality is useful if the Axis product is located on a local network behind a firewall, and notifications, uploads, alarms, etc need to be sent to a destination outside the local network (for example the Internet).
-
Page 32: Storage
To use SNMP v3, HTTPS must be enabled, see HTTPS on page 26. To enable SNMP v3, check the box and provide the initial user password. Note The initial password can only be set once. If the password is lost, the Axis product must be reset to factory default, see How to reset to factory default settings on page 34. UPnP ®... -
Page 33: Maintenance
The Axis product provides several maintenance functions. These are available under System Options > Maintenance. Click Restart to perform a correct restart if the Axis product is not behaving as expected. This will not affect any of the current settings. -
Page 34: Advanced
Plain Config is for advanced users with experience of Axis product configuration. Most parameters can be set and modified from this page. To open Plain Config, go to System Options > Advanced > Plain Config. Axis Support does not provide assistance with this feature. How to reset to factory default settings Important Reset to factory default should be used with caution. -
Page 35: Troubleshooting
The latest version may contain a correction that fixes your particular problem. The current firmware version in the Axis product is displayed in the page Setup > Basic Setup and in Setup > About. - Page 36 The product is accessible locally but not externally Router configuration To configure your router to allow incoming data traffic to the Axis product, enable the NAT-traversal feature which will attempt to automatically configure the router to allow access to the Axis ®...
-
Page 37: Specifications
AXIS C8033 Network Audio Bridge Specifications Specifications To find the latest version of the product’s datasheet, go to the product page on axis.com and locate Support & Documentation. Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com... - Page 38 User Manual Ver. M1.11 AXIS C8033 Network Audio Bridge Date: September 2017 © Axis Communications AB, 2017 Part No. 1760758 Available from A1 Security Cameras www.a1securitycameras.com email: sales@a1securitycameras.com...