Parts & Features - OmniBlend JTC V Owner's Manual

PARTS & FEATURES
2-Part Lid: Is easy to put on and take off, and easy to clean. Always use
the lid and the lid insert when the machine is in operation. The 1.5ltr jug
has a square lid, the 2ltr jug has a round lid. Both have lid inserts. For the
2ltr jug, make sure it is fitted within the 2 little knobs, to avoid it to rotate
during blending. Remove the lid insert to use the tamper or add
ingredients.
Tamper: use the tamper for blending thicker textures, to move the
ingredients in the jug. ALWAYS use the tamper through the lid (by
removing the insert from the lid), as this prevents the tamper from
touching the blades.
Speed & Timer: press Low, Medium, or High speed to blend for custom
blending time and/or speed. Stop the blender by pressing the button
again. Select a time slot for an automatic cycle. The machine will turn off
automatically after 35, 60, or 90 seconds. When using the timer, the
blender will start slow, and then speed up to high before slowing down
again. For thicker textures, and tougher blends, increase the
10