Parts & Features - OmniBlend I Owner's Manual

PARTS & FEATURES
2-Part Lid: your new machine has our latest lid design. It is easy to put on
and take off, and easy to clean. Always use the lid and the lid insert when
the machine is in operation. The 1.5ltr jug has a square lid, the 2ltr jug
has a round lid. Both have lid inserts.
CAUTION: Lids are not interchangeable between different container sizes.
Snap the lid onto the container and leave in place for a few minutes.
Once the lid has been left on the container, it will be much easier to lock
or remove.
Lid Insert: press into the lid. For the 2ltr jug, make sure it is fitted within the
2 little knobs, to avoid it to rotate during blending. Remove the lid insert to
use the tamper or add ingredients.
To lock the lid in place:
1. Position lid on container with sides of the lid between the
container's inner edges.
2. Push the lid the container's edges until it locks in place.
The lid must always be secured when processing, especially hot liquids
that may scald.
9