OmniBlend JTC V Owner's Manual page 8

7. Do not let cord hang over edge of table or counter. Do not let cord contact hot surface, including the
stove.
8. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons
or damage to the blender. A silicon scraper or spatula may be used, but only when the OmniBlend
blender is not running.
9. The tamper provided must be used only when the main part of the lid is in place.
10. Blades are sharp. Handle or remove blade and blade assembly from the container with extreme care to
avoid injury. To reduce the risk of injury, never place a blade assembly on the motor base unless
assembled to the OmniBlend container.
11. Do not leave foreign objects, such as spoons, forks, knives or the lid plug, in the container as this will
damage the blades and other components when starting the machine and may cause injury.
12. Never attempt to operate with damaged blades.
13. Always operate blender with lid and lid plug firmly in place. The lid plug should be removed only when
adding ingredients and when using the tamper.
8