OmniBlend JTC V Owner's Manual page 20

Motor Base:
1. Unplug the power cord.
2. Wash the outside surface with a damp soft cloth or sponge, which has been rinsed in a mild solution of
liquid detergent and warm water. Do not place the motor base in water.
3. The centering pad can be removed for more thorough cleaning.
4. Thoroughly clean the drive socket. It may become sticky from use. Use a moistened cotton swab to clean
the grooves around the water-shielded switches. Immediately dry any excess water.
5. Polish with a soft cloth.
20