OmniBlend JTC V Owner's Manual page 9

14. When blending hot liquids or ingredients, use caution; spray or escaping steam may cause scalding
and burns. Fill the jug 1/3 or max ½ full. Filling the jug more than halfway can cause too much steam to
build up and can blow the lid off the blender. Remove the lid-plug, and place lid (without the cap)
securely on the jug. Cover the blender lid with a clean kitchen towel and allow for an easy escape route
for the hot steam. Hold the lid securely and start blending on lowest speed. Gradually increase speed if
needed.
15. When making nut butters or oil-based foods, be cautious of heat. The jug will heat up quicker than with
using liquids. Processing for longer periods can cause dangerous overheating. And can cause damage
to the jug. Leave the jug to cool for 10-15 min, and then continue processing.
9