Subscribe to Our Youtube Channel
Related Manuals for OmniBlend TM788
Summary of Contents for OmniBlend TM788
- Page 1 OWNER’S MANUAL OmniBlend III TM788 OMNIBLEND (PTY) LTD SOUTH AFRICA www.omniblend.co.za...
-
Page 2: Table Of Contents
Table of Contents LET’S GET STARTED ................................ 3 SERVICE & REGISTRATION ............................4 IMPORTANT SAFEGUARDS ............................5 PARTS & FEATURES ..............................10 ABOUT THE BLADES ..............................12 HOW TO USE THE TAMPER? ............................14 CONTROL PANEL ................................. 15 HINTS FOR SETTING SPEEDS ............................16 CARE AND CLEANING .............................. -
Page 3: Let's Get Started
Please read all the safety information, warnings, and instructional material found in this booklet before getting started. • Set your OmniBlend machine on a dry, level surface. • Make sure that the power switch is set to Off, and that the machine is plugged into a grounded electrical outlet. -
Page 4: Service & Registration
SERVICE & REGISTRATION OMNIBLEND SERVICE & REPAIRS Before returning this product for any reason, first contact OmniBlend Customer Service at 021 012 5999, email hello@omniblend.co.za https://omniblend.co.za/pages/customer-return-form For repair request: PRODUCT REGISTRATION Register your blender for faster and easier service in the future. You can register here: https://omniblend.co.za/pages/product-registration-form... -
Page 5: Important Safeguards
IMPORTANT SAFEGUARDS To avoid the risk of serious injury when using your OmniBlend blender, basic safety precautions should be followed, including the following. IMPORTANT INSTRUCTIONS FOR SAFE USE Do not leave your OmniBlend blender unattended when operating. In case of a technical failure, contact OmniBlend for any repairs or servicing requirements. - Page 6 The Automatic overload protection is a built-in feature which is designed to protect the motor and prevent your machine from overheating. If the Overload Protection kicks in, the machine will stop operating suddenly. Leave the machine to cool down for 5 to 10 minutes, and then (while the machine is still connected to power), press the Overload Button on the bottom of the machine.
- Page 7 Call OmniBlend Customer Service at 021 012 5999 or email support@omniblend.co.za for examination, repair or replacement. 6. The use of attachments not expressly authorized or sold by OmniBlend for use with this blender, including canning jars, may cause fire, electric shock, or injury.
- Page 8 8. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A silicon scraper or spatula may be used, but only when the OmniBlend blender is not running.
- Page 9 14. When blending hot liquids or ingredients, use caution; spray or escaping steam may cause scalding and burns. Fill the jug 1/3 or max ½ full. Filling the jug more than halfway can cause too much steam to build up and can blow the lid off the blender. Remove the lid-plug, and place lid (without the cap) securely on the jug.
-
Page 10: Parts & Features
PARTS & FEATURES 2-Part Lid: Is easy to put on and take off, and easy to clean. Always use the lid and the lid insert when the machine is in operation. The 1.5ltr jug has a square lid, the 2ltr jug has a round lid. Both have lid inserts;... - Page 11 To lock the lid in place: 1. Position lid on container with sides of the lid between the container’s inner edges. 2. Push the lid the container’s edges until it locks in place. WARNING Rotating Blades can cause severe injury. DO NOT reach into container while machine is running.
-
Page 12: About The Blades
ABOUT THE BLADES The OmniBlend machine comes standard with the multi-purpose blade. The blade assembly has stainless steel ball bearing. This blade fits both the 1.5 Ltr and 2 Ltr container. Additional containers with blades may be purchased separately. Blade assemblies can also be purchased separately. The blade assembly comes with a 1-year warranty. - Page 13 WARNING Rotating Blades can cause severe injury. DO NOT put hands, spatulas, etc. in the container while the machine is running or while the container is still on the base, only use the tamper through the lid. WARNING Moving Parts may become hot after extended use. DO NOT touch.
-
Page 14: How To Use The Tamper
HOW TO USE THE TAMPER? The tamper allows you to accelerate the process of very thick and/or frozen mixtures that cannot be processed in a regular blender. Using the tamper maintains circulation by preventing air pockets from forming. While the machine is running, and only through the lid plug opening, use the tamper to press ingredients into the blades as you make frozen ice creams and nut butters, or purée fruits and vegetables. -
Page 15: Control Panel
WARNING When using the tamper, hold the jug firm on the base with the other hand, and avoid excessive wiggling of the jug on the base. If the jug is wiggling on the base it starts wearing the drive socket. CONTROL PANEL 1. -
Page 16: Hints For Setting Speeds
HINTS FOR SETTING SPEEDS Always start the machine with the Speed Switch down to the LO position. If a recipe calls for processing on HI, flick the switch from LO to HI. Do not begin processing on HI, always start with the Variable Speed Dial on LO. - Page 17 WARNING Never Start on Speeds Above 1 with Hot Liquids to Avoid Possible Burns. Use Caution; escaping steam or splashes may scald. Leave a small opening for the heat to escape, and hold the lid with a tea towel. Blend on low speed...
-
Page 18: Care And Cleaning
CARE AND CLEANING Container: Rinse the jug after each use with warm water. To prepare your new machine for initial use, follow the steps under Normal Cleaning. This will clean the unit, and break-in the motor. Normal Cleaning: 1. Fill one third of the container with warm water and add a couple drops of dish wash liquid. 2. - Page 19 Lid & Lid Plug: Separate the lid and lid plug. Wash in warm soapy water. Rinse clean under running water, and dry. Reassemble before use. IMPORTANT: To ensure continued and effective performance, do not put the container, lid, or lid plug in the dishwasher.
- Page 20 Motor Base: 1. Unplug the power cord. 2. Wash the outside surface with a damp soft cloth or sponge, which has been rinsed in a mild solution of liquid detergent and warm water. Do not place the motor base in water. 3.
-
Page 21: Specifications
240 V, 50/60 Hz, 11.5 A Uses a R.S.A. three–prong grounded cord. Dimensions: Height: 52 cm Width: 18,42 cm Depth: 22,35 cm To see the complete line of OmniBlend products, visit www.omniblend.co.za OmniBlend (Pty) Ltd, 3 St. Georges Mall, 506 The Colosseum, Cape Town, 8001 021 012 5999...
Need help?
Do you have a question about the TM788 and is the answer not in the manual?
Questions and answers