Advertisement
Datenblatt
Lichtleiterverstärker E3X-HD
E3X-HD
Ordering Information
Fiber Amplifier Units
Standard models
Appearance
Model for Sensor Communications Unit
Appearance
Accessories (sold separately)
Wire-saving connectors (Required for models for Wire-saving Connectors.)
Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately. * Protective stickers: provided.
Type
Master
Connector
Slave
Connector
Sensor I/O Connectors (Required for models with M8 Connectors.)
Connectors are not provided with the Fiber Amplifier Unit and must be ordered separately.
Size
Cable
M8
Standard
Mounting Bracket
A Mounting Bracket is not provided with the Fiber Amplifier Unit and must be
ordered separately as required.
Appearance
Erstellt am 28.09.2020 um 20:20 Uhr | Alle Angaben ohne Gewähr, Irrtümer und Änderungen vorbehalten!
|
ATEG Automation GmbH
Intzestraße 50
(Dimensions ➜ page 12)
Connecting method
Pre-wired (2 m)
Wire-saving Connector
M8 Connector
(Dimensions ➜ page 12)
Model
Applicable Sensor Communications Unit
E3X-HD0
Appearance
Cable length
Number of conductors
2 m
Appearance
Straight
L-shaped
Model
Quantity
E39-L143
1
|
42859 Remscheid
Models
NPN output
PNP output
E3X-HD11 2M
E3X-HD41 2M
E3X-HD6
E3X-HD8
E3X-HD14
E3X-HD44
E3X-ECT
E3X-CRT
Models
3
E3X-CN11
1
E3X-CN12
Cable type
Models
2 m
XS3F-M421-402-A
5 m
XS3F-M421-405-A
4-wire
XS3F-M422-402-A
2 m
5 m
XS3F-M422-405-A
DIN Track
A Din Track is not provided with the Fiber Amplifier Unit and must be ordered
separately as required.
Appearance
Type
Shallow type, total length: 1 m
Shallow type, total length: 0.5 m
Deep type, total length: 1 m
End Plate
Two End Plates are provided with the Sensor Communications Unit.
End Plates are not provided with the Fiber Amplifier Unit and must be ordered
separately as required.
Appearance
Model
PFP-M
|
|
Germany
Tel.: +49 (0)2191 / 591457-0
E3X-HD
Models
Quantity
PFP-100N
PFP-50N
1
PFP-100N2
Quantity
1
2
Seite 3 von 14
|
| www.ateg.de
info@ateg.de
Advertisement
